Comtech EF Data CDM-800 - Manual (Page 119)

CDM-800 Gateway Router Revision 1
Serial-based Remote Product Management MN-CDM800
6–11
Parameter
Type
Command
(Instruction
& Qualifier)
Number of
Arguments
Description of Arguments
Response to
Command
Query
(Instruction &
Qualifier)
Response to Query
Management
MAC Address
N/A 12 bytes, alpha-
numerical
Query only.
Returns the unique MAC Address for the modem.
Example: MAC=00:06:B0:00:01:C2 N/A MAC? MAC=aabbccddeeff
(see Description of Arguments)
GE1 MAC
Address
N/A 12 bytes, alpha-
numerical
Query only.
Returns the unique GE1 MAC Address.
Example: MG1=00:06:B0:00:01:C2 N/A MG1? MG1=aabbccddeeff
(see Description of Arguments)
GE2 MAC
Address
N/A 12 bytes, alpha-
numerical
Query only.
Returns the unique GE2 MAC Address.
Example: MG2=00:06:B0:00:01:C2 N/A MG2? MG2=aabbccddeeff
(see Description of Arguments)
Management
Link
Configuration
MLC= 1 byte, value 0 thru
5
Command or Query.
Management Interface mode, where:
0 = Auto Negotiate
1 = reserved
2 = 100Mbps – Full Duplex
3 = 100Mbps – Half Duplex
4 = 10Mbps – Full Duplex
5 = 10Mbps – Half Duplex
MLC =
MLC?
MLC *
MLC #
MLC? MLC =x
(see Description of Arguments)
Actual
Negotiated Port
Speed
N/A None Query only.
Returns actual negotiated port speed in the form abcd, where:
a = GE 1 negotiated port speed.
b = GE 2 negotiated port speed.
c = the management port negotiated port speed.
a, b, c, d have the following values:
0 = Link down
1 = 100 Full
2 = 100 Half
3 = 10 Full
4 = 10 Half
5 = 1000 Full
N/A NPS? NPS=abc
(see Description of Arguments)
SNMP Read
Community
SRC= 16 bytes,
characters, no
spaces
Command or Query.
SNMP read community string. Empty string is not allowed
Example: <1/SRC=public SRC =
SRC!
SRC? SRC =x
(see Description of Arguments)
SNMP
Write
Community
SWC= 16 bytes,
characters, no
spaces
Command or Query.
SNMP write community string. Empty string is not allowed
Example: <1/SWC =public SWC =
SWC!
SWC? SWC =x
(see Description of
Arguments)