Comtech EF Data CDM-800 - Manual (Page 103)

CDM-800 Gateway Router Revision 1
Ethernet-based Remote Product Management MN-CDM800
5–43
5.4.4.4.2 Status | Monitor page
Use this page to view the unit temperature, alarms summary, plus a scrollable read‐only
window that displays any events and alarms as logged by the unit during normal operation.
Figure 5‐22. Status | Monitor page
System Monitor
This section provides the operating temperature of the unit (°C). Click [Refresh] to update this
display.
Alarms
This section provides an overall tally of the Unit, Tx, and Traffic Ethernet alarms compiled since
the logging buffer was last cleared.
Click [Refresh Alarms] to update this section with the latest available information.
Events
Each event or alarm is logged with a Date‐ and Time‐stamp, and a Description is provided.
Click [Refresh Events] to update the Events table with the most recently recorded events.
Click [Clear Event Table] to delete all existing logged entries from the Events log. The log is then
reset to one (1) entry: “INFO – Event Log Cleared”.