Comtech EF Data CDM-800 - Manual (Page 34)

CDM-800 Gateway Router Revision 1
Installation MN-CDM800
2–4
2.2.1 Installing the Optional Rear-Mounting Support Brackets Kit
Tools needed to install the KT/6228‐2 (4”) or KT/6228‐3 (10”) Bracket Kit:
• A medium Phillips™ screwdriver
• A 5/32‐inch SAE Allen™ Wrench
• An adjustable Crescent™ wrench.
To install the CEFD Chassis‐Style kit:
Step Task
1
Use the #10 flat washers, #10 split washers, and #10 hex nuts to secure the #10
shoulder screws to the unit chassis through the rear right and left side mounting slots.
2
Use the #10 rack bracket bolts to install the rear support brackets onto the rack
enclosure threaded rear mounting rails.
3
Mount the unit into the rack enclosure. Ensure that the shoulders of the #10 shoulder
screws properly engage into the rear support bracket slots.