Comtech EF Data CDM-800 - Manual (Page 107)

CDM-800 Gateway Router Revision 1
Ethernet-based Remote Product Management MN-CDM800
5–47
5.4.4.5.2 Utility | Reboot
Use this page to perform a soft reboot of the CDM‐800. Note that the function of this page is
identical to the System Reboot section of the ‘Admin | Firmware’ page described earlier.
Figure 5‐24. Utility | Reboot page
System Reboot
Click [Reboot] to reboot the unit. A dialogue box
appears to prompt continuation or cancellation
of the reboot process:
Click [OK] to continue the reboot process, or
[Cancel] to abort the process and return to the
‘Utility | Reboot’ page.
Once the reboot process resumes, the ‘Utility | Reboot’ page is replaced with the dynamic
message “Please wait... CDM‐800 is rebooting. Login will be required in XX seconds” – the time
count decrements to 0 seconds before the unit reboots. After the reboot, login is required once
again to resume use of the Web Server Interface.