Printhead setup – Avery Dennison 676 User Manual
Page 30
30 •
••
• Control Panel Operation
P R I N T P O S I T I O N S T A T I O N 3
V A L U E : ± X X N E W V A L U E : ± Y Y
This screen follows the second screen under PRINTER ADJUSTMENTS. This
screen allows the print position of station 3 to be adjusted.
The
The value is displayed in a positive/negative format. The value ranges for XX and
YY can be from a -9 to a +9
Pressing the MODE/Down Arrow key will take the user to the next screen.
Pressing the EXIT/Up Arrow key will take the user back to the HOME.
C H A N G E C U T P O S I T I O N
V A L U E : ± X X N E W V A L U E : ± Y Y
This screen follows the print adjust screens. This screen allows the cut position to be
adjusted. The
displayed in a positive/negative format. The value ranges for XX and YY can be
from a -9 to a +9. Pressing ENTER will change the CURRENT CUT value to the
NEW CUT value. Pressing the MODE/Down Arrow key will take the user to the
next screen. Pressing the EXIT/Up Arrow key will take the user back to the
"HOME" screen.
S T A T I O N 2 D O T S H I F T
V A L U E : ± X X N E W V A L U E : ± Y Y
This screen follows the CHANGE CUT POSITION screen. This screen allows the
print position of station 2 to be adjusted in the WEB direction.
The
The value is displayed in a positive/negative format. The value ranges for XX and
YY can be from a -16 to a +16 dots. (A dot is 1/300)
Pressing the MODE/Down Arrow key will take the user to the first screen under
PRINTER ADJUSTMENTS.
Pressing the EXIT/Up Arrow key will take the user back to the HOME.
PRINTHEAD SETUP
P R E S S E N T E R F O R
P R I N T H E A D S E T U P
This screen follows the PRINT/CUT POSITIONS screen.
Pressing ENTER will take the user to the PRINTHEAD SETUP screens.
Pressing the MODE/Down Arrow key will take the user to the "LIFE
COUNTS/VERSIONS" screen.
Pressing the EXIT/Up Arrow key will take the user back to the "HOME" screen.