Avery Dennison 676 - Manual (Page 13)

Users Manual Model 676 Customer Responsibility • •• • 13
Customer Responsibility
Location of Printer
The printer weighs approximately 70 Lbs (32 Kg) and requires a table of sufficient
quality and strength to handle this load while the printer is operating. AVERY
DENNISON recommends an industrial type worktable having the approximate
dimensions of 96" wide to 30" deep to 32" high. Refer to Figure 2.
Figure 2 - Recommended Workstation Layout.
The location of the AVERY DENNISON 676 printer should be based on human
factors. The printer should be located in an area that maintains optimum flow of your
product while providing for the operator’s comfort. AVERY DENNISON has taken
significant steps to ensure that the operator controls and operations are easily
accessible. This goal can only be met, however, if the printer is also located with
human factors in mind. These include the height of the printer, the space around the
printer, and the accessibility to the printer.
The AVERY DENNISON 676 printer is a high-resolution thermal printer. While
AVERY DENNISON has designed the printer to be reasonably quiet, it is
recommended to locate the printer in an area where printing and cutting repetitious
noise is acceptable.
The unit should always be operated with the cover closed to minimize the amount of
dust and dirt in the machine.