Avery Dennison 676 - Manual (Page 121)

Z:\Manual-Release\676\676 v9.0.doc
Optional 4 1/4” Stacker Specifications
• 4 ¼” (108mm) Web x 3 1/2” (89mm) Feed
• Will work on 636, 656, 676 and 545
• Old machines may require the knife strut to be replaced with one that has a mount hole – Part number 355018.
• Fabric and heat seal only - not for pressure sensitive or tags.
• Stack height dependent on material size and weight. (may not reach full stacker height)
• Jam sensor will require relocating the LED to the center position for the 676 & 545 and the back set of holes for the 636
& 656.
• If changing from standard stacker to 4.25” stacker - the knife guard must be changed to match the stacker being used.