4 using the layer selection modifier keys – Analog Way VERTIGE - Ref. VRC300 User Manual User Manual
Page 33

33
5.1.4 Using the layer selection modifier keys
Based on this selection, all operations such as preset loading, source selection, layer selection, etc will be
directed to the Preview or Program.
5.1.4 Using the layer selection modifier keys
The Layer selection modifier keys allow you to quickly adjust your selection of layers:
• NATIVE button:
The
NATIVE
button allows you to toggle between a standard layer selection and a native layer selection.
By default, the Vertige™ is in a standard layer selection mode (button is lit green). If you press the button, the
native mode becomes activated (button is lit yellow).
• SINGLE button:
The
SINGLE
button allows you to select only 1 layer. This layer to be selected is at the intersection of the
SCREEN
button and
DEPTH
button. For example, if the
SCREEN
button is 2 and the
LAYER
button is 3,
pressing the
SINGLE
button will select the layer 3 on the screen 2. Using the left and right arrows, you can
adjust the screen number or the depth number.
• ALL button:
Press the
ALL
button to select all standard layers on all screens. When the
Native
mode is active, pressing the
ALL
button will select all native layers on all screens.
• NONE button:
Press the
NONE
button to deselect all layers. When the
Native
mode is active, pressing the
NONE
button will
deselect all native layers.
• [+]:
Press and hold the
[+]
key to add layers to the current selection. While holding the
[+]
key, any new layer
selection from the touch screen or layer selection buttons will be added to the currently selected layers.
For example, select your camera layer 1 then hold the + button and select all others camera layers.
• [-]:
Press and hold the
[-]
key to remove layers from the current selection. While holding the
[-]
key, any new layer
selection from the touch screen or the layer selection buttons will be removed from the currently selected
layers.
• Examples:
Select the main layer on Center screen
To select the main layer on the center screen (screen 2 in this example), there are several options, depending
on your preferred work style:
Since you are selecting only one layer, you could quickly select it using the touch screen.
You could also navigate the
SCREEN
selection button to the center screen, navigate the
LAYER
selection
button to the Layer 1, and then press the
SINGLE
button in the Layer selection area.
You could also select all of the Layer 1 layers, and use the
[-]
key to deselect the unneeded layers.