Analog Way VERTIGE - Ref. VRC300 User Manual - Manual (Page 28)

28
4.1.13 Preset Viewer
Keying setup can be done either by setting directly color references and tolerances or by using an assistant
( GRAB button). When using the assistant, select the color area you want to mask and click the PICK button.
Color areas are cumulative; if the results are not satisfactory, click the RESET button then grab another
area.
For further information on keying effects configuration, please read the corresponding LiveCore™ product
user manual.
4.1.12 Stream image configuration (during the event)
In the Preset page, press the IMAGE SETTINGS button to display the stream image settings menu
while maintaining a minimal view on the Preview or Program preset.
Select the layer containing the stream for
whichyou want to configure the image
settings then select the ASPECT , CROP ,
FILTER , OPTIMIZE or KEYING option to
adjust the corresponding settings.
To restore the default Preset
page view, simply press the
MAXIMIZE button.
4.1.13 Preset Viewer
The Preset page allows you to view the
content of your screens (Program and
Preview).
This page can display up to 6 screens
simultaneously. If your configuration
contains more than 6 screens, press the
left/right arrows on the touchscreen to
navigate left or right and reveal hidden
screens.
• Locking the Program
Press the LOCK button to prevent any direct changes on the Program. Press this button again to
unlock the Program.
• Updating selected layer snapshot
Select the layer for which you want to update the stream snapshot. Press the SNAPSHOT button.
• Displaying/Hiding empty layers
Press the HIDE EMPTY LAYERS button to hide all empty layers (i.e. with no stream assigned).
Press this button to display all layers again.