Analog Way VERTIGE - Ref. VRC300 User Manual User Manual

Page 31

4.1.15 Sequence page

• Deleting a cue stack:

Select an existing cue stack in the list then select the

DELETE

option. Press the

Delete

button.

Important: The last remaining cue stack cannot be deleted.

• Adding a cue to a cue stack:

Select an existing cue in the list then select the

EDIT

option. Press the

[+]

button located on the left side of

the screen to insert a new cue step before the selected cue step, or press the

[+]

button located on the right

side of the screen to add a new cue step after the selected cue step.

• Configuring a cue stack:

Select the cue you want to configure then select the

EDIT

option to display the corresponding properties.

Adjust them if necessary:

Disabled: Check this box to disable the cue (item will be skipped during playback).

Trigger: The cue will wait for a trigger before executing its action during playback.

Action: The action that will get executed in response to the trigger.

• Reordering a cue stack:

Select the cue you want to move then select the

EDIT

option. Press the

[<]

button to move the selected cue

step item to the left, or press the

[>]

button to move the selected cue step item to the right.

• Deleting a cue:

Select an existing cue in the list then select the

DELETE

option. Press the

Delete

button.

Important: The last remaining cue in a cue stack cannot be deleted.

• Playing a cue sequence:

Select the cue where playback will start, then press the

PLAY

button to start continuous

playback. Press the

STOP

button to stop playing the sequence.

• Playing a cue sequence step-by-step:

Press the

PLAY TO NEXT

button to execute the selected cue then move the selection to

the following item in the list.

Press the

PLAY TO PREVIOUS

button to execute the selected cue then move the selection

to the previous item in the list.

• Enabling loop playback:

Before starting cue sequence playback, press the

LOOP

button to enable loop playback.

This action cannot be undone.

Cue sequence playback may also be controlled from the Vertige™ front panel. For more

information, please read chapter 5.7.2 Controlling cue sequence playback.