Analog Way VERTIGE - Ref. VRC300 User Manual - Manual (Page 24)

24
4.1.8 Monitoring configuration
4.1.8 Monitoring configuration
The Monitoring page allows you to manage monitoring outputs:
• Applying a mosaic template:
Select the TEMPLATE option in the left
menu then select the monitoring output
for which you want to apply a mosaic
template. Browse the templates then
select the one you want to apply. Check
the Keep Widget Sources option if you
want to preserve the current Mosaic
widgets source. When ready, press the
Apply button to overwrite the current
configuration.
• Configuring the display mode and
widget(s) source:
Select the LAYOUT option in the left
menu then select the monitoring output
you want to configure. Select a display
mode (Mosaic with several widgets or
Full Screen) then adjust the source(s)
and OSD option(s). Note that widgets
position and size cannot be adjusted at
the moment.
• Saving a monitoring preset to memory:
Select the SAVE option in the left menu
then select the monitoring output for
which you want to save the current
configuration to memory (16 memory
slots available). Select the slot where the
current configuration will be saved and
optionally enter a description. When
ready, press the Save button.