14 presets management – Analog Way VERTIGE - Ref. VRC300 User Manual User Manual
Page 29

29
4.1.14 Presets management
4.1.14 Presets management
In the
Preset
page, press the
PRESET GRID
button to display the preset menu while maintaining a
minimal view on the Preview or Program preset.
• Saving a preset to memory:
To save a preset from Program, make
sure that the
PROGRAM
button is
selected. To save a preset from Preview,
make sure that the
PREVIEW
button is
selected. Select the
SAVE
option in the
left menu then select the memory slot
where the current preset will be saved
and optionally enter a description. When
ready, press the
Save
button.
• Loading a preset from memory:
First be sure that the
PREVIEW
button is
selected if you wish to load the preset to
Preview, or that the
PROGRAM
button is
selected if you wish to load the preset to
Program.
Select the
LOAD
option in the left menu
then select one of the memory slots to
automatically recall the corresponding
preset from memory and update the
Preview or the Program content.
• Renaming a preset:
Select the
LOAD
option in the left menu
then select one of the memory slots to
automatically recall the corresponding
preset from memory and update the
Preview or the Program content. Enter a
description for this preset then press the
Apply
button.
Another quick way to switch from Program to Preview (and vice versa) is to
press the Program/Preview toggle button.