Analog Way VERTIGE - Ref. VRC300 User Manual User Manual
Page 30
30
4.1.15 Sequence page
• Erasing a preset memory:
Select the
CLEAR
option in the left menu
then select the desired memory slot.
When ready press the
Clear
button to
erase it (the corresponding
PRESET
key
will turn green).
To restore the default
Preset
page view, simply press the
MAXIMIZE
button.
4.1.15 Sequence page
The
Sequence
page allows you to define
a series of cues that can be played back
sequentially.
A cue is defined by a trigger (hotkey, fixed
duration…) and a specific action (load
preset, take…). Vertige™ stores series
of cues into cue stacks. The sequence
may contain one or more cue stacks
and each cue stack contains at least one
cue. Every iteration starts with a default
sequence containing a single cue stack
with a default cue.
• Adding a cue stack:
Select an existing cue stack in the list then select the
EDIT
option. Press the
[+]
button located on the left side
of the screen to insert a new cue stack before the selected cue stack, or press the
[+]
button located on the
right side of the screen to add a new cue stack after the selected cue stack.
• Configuring a cue stack:
Select the cue stack you want to configure then select the
EDIT
option to display the corresponding properties.
Adjust them if necessary:
Color: The cue stack can be given a background color to make it stand out in the cue sequence.
Name: The name of the cue stack.
• Moving a cue stack to the left or to the right:
Select the cue stack you want to move then select the EDIT option. Press the
[<]
button to move the selected
cue stack item to the left, or press the
[>]
button to move the selected cue stack to the right.
This action cannot be undone.