Analog Way VERTIGE - Ref. VRC300 User Manual - Manual (Page 27)

27
4.1.11 Stream image configuration
• Configuring the native streams
mapping:
In the left menu, select the MAP option
then select the native source for which
you want to configure the native streams
mapping. For each screen, select the
native stream that will be displayed by
its native layer when the corresponding
source key is pressed in the front panel
of the Vertige™.
4.1.11 Stream image configuration (before the event has started)
The Image page allows you to adjust stream image settings (aspect ratio, cropping, color corrections…) and
configure keying effects.
• Configuring the stream image settings:
Select the assembly for which you
want to adjust the image settings of a
stream. Select the desired stream in
the list then select the ASPECT, CROP,
FILTER or OPTIMIZE option to adjust the
corresponding image settings. Note that
freezing the stream might help you to
adjust the settings; also, you might want
to grab a new snapshot once you’re
done editing the settings.
• Configuring keying effects:
Select the assembly for which you want
to configure the keying effects and select
the KEYING / CONFIGURE option. Select
the desired stream in the list then select
the keying mode:
- COLORKILLER: classic color keyer
deleting a specific color space defined
by user.
- LUMAKILLER: Luma color keyer deleting
a black & white range.
- CREMATTE®: The algorithm of color
keying developed by Analog Way. This
keying will perform advanced effects on transparent items, smooth edge and color correction.
Configuring stream image settings or keying effects using the Image page is particularly well
suited when several streams need to be reviewed and adjusted, typically after having added
new streams to an assembly and before running a show.
Selecting a stream here will automatically overwrite the related screen presets (Preview and
Program) with no possibility of restoring them after the configuration process: the selected
stream will be automatically displayed full screen and all other layers will be hidden.
If you want to configure a stream image setting while preserving the screens presets, please
read chapter 4.1.6 Assembly configuration.