5 live – Analog Way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual User Manual
Page 86

86
7.5 Live
The Live mode defaults to displaying all screens and enables the TAKE button to affect all Screens.
On the right, you will find all your memorized
presets under the tab called “ MEMORIES ”.
A simple drag and drop on the screen will
load your preset into the screen (Program or
Preview).
LABEL: don’t forget that you can assign a
name to your memories using the SHIFT +
Click operation.
If you want to change an input into your preset
into the live mode, simply use the left source
ribbon and drag and drop your input into a
layer.
Under each preset you have its size and its
duration.
Remember that a preset saved into a screen
with a 1024x768 resolution, will normally
keep its size into a screen of higher resolution.
If you want the preset to be adapted to the
target screen size, use the AUTOSCALE button.
With this function enabled, all preset layer
attributes will be automatically stretched to
fill the target screen.
FILTER FEATURE:
Use the Filter feature to load and take only
a subset of the presets information. Choose
between: source, pos/size, transpa-rency,
cropping, border, transitions, effects, ti-ming,
speed, flying curves, Native background
and ALL at the same time. Only the selected
feature will be load and take with the preset.
If you want to load the entire preset, please
use ALL.
Once your preset is ready to send, use the T-bar, or the TAKE button.
When you use several screens, you have the possibility to load a preset in one of the screens. You can TAKE
the Program on one screen separately, or all at the same time, by modifying the current screen selections,
found at the top of the TAKE/T-BAR section:
7.5 Live