Analog Way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual - Manual (Page 63)

63
7.3.12 Logo management
Assign all your slots to an image in order to have all your slots filled:
Remember that you will have access to this menu at any
time. Those 8 slots can be loaded with another images
in the future.
Please choose your frame under the library images to access a lot of settings:
- ENABLE: Enable or not this slot
- DUAL FRAME: Status to indicate if the Dual Frame feature is currently in use. The Dual Frame feature will
be enabled automatically when a Dual Frame library image is selected for the current Frame Slot. While the
Dual Frame feature is enabled, the preceeding Frame slot will be disabled.
- NATIVE FRAME: Shows you if the native background is enabled and which output is chosen. You can
change this parameter into the Setup assistant only.
- LABEL: Rename this frame
- STATUS: Allows you to see the resolution of the image
- ASPECT RATIO: Set up the aspect In, Out and crop your frame.
To use still image(Frame)/Logo with this device,
you have access to 8 fast slots : four frame slots
and four logo slot. Frame slot can be loaded with
either a frame or a logo whereas logo slot can only
be loaded with a logo.
To have access to the all library of images, simply
click on Frame1 or to the “Setup” shortcut,
available on each slot.
7.3.12 Logo management