Analog Way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual User Manual

Page 57

7.3.10 Input management

In this tab, you can define what the input format exactly is. The input

format is automatically detected by the LiveCore™ unit but you can

change it or force it. The available formats are close to the current one,

in terms of lines. This is available only for analog computer formats.

The next tab is the USER FORMAT:

Next settings available on the ASPECT tab are:

- CROP:

use the Top, Bottom, Left and Right values to crop

your input. A finder is also available. When activated,

use the white rectangle to set up accurately the cropped

area.

Under the ASPECT RATIO section:

ASPECT IN:

Select the correct aspect ratio of your input (5:4 4:3 etc…). This setting doesn’t exist when the

input is set as native.

- PREDEFINED CROP:

Choose a specific cropped ratio if you use a source with black bands on top/bottom

or left/right

- ASPECT OUT:

Define the way the image will be displayed into a layer (full screen, centered, cropped or 1:1)

- OVERSCAN:

Choose to apply or not a predefined zoom on the image (use with CRT TV)

This manual is related to the following products: