Analog Way ASCENDER 16 (LIVECORE) - Ref. ASC1602 User Manual - Manual (Page 41)

41
6.1 Web-based RCS requirement
6. CONTROLLING A LIVECORE™ UNIT
6.1 Web-based RCS requirement
6.2 Connecting with the Web RCS
A LiveCore™ unit can be controlled and operated either via the Front Panel, from your computer via the
webRCS, or via one or our Event Controllers. (Control of the LiveCore™ unit can also be integrated into
automation and control systems, contact your local technical support for more details.)
To be connected, you need to use a LAN connection. Use a crossover
cable if you connect your computer directly to the unit, or use straight
cables if you are connecting through a switch or hub.
Before switching ON the unit, please plug a LAN cable on the rear panel into the Ethernet port. Then switch
ON the unit.
By default, the network settings on the LiveCore™ unit are
Default IP Address: 192.168.2.140
Default Subnet Mask: 255.255.255.0
Default port: 80
Please be sure that ports 80, 843 and 4521 are available.
To be able to connect to this address, your computer will need to
be configured to use a unique IP address on the same network. If
this setup will be part of a larger network with other devices, please
check with your network administrator before plugging these
devices into the network to avoid any IP address conflicts.
For example, you could assign the following static IP address to your
computer:
Example Computer IP address: 192.168.2.50
Example Computer Subnet Mask: 255.255.255.0
Then into your web browser, please enter directly the IP address or host name of the LiveCore™ unit into the
address bar of your browser:
The recommended requirements are:
- Adobe Flash® player 11.3
- 1Gb Ram
- 200Mb of free space
- 100Mb Network adaptor or above
- 1920x1080 optimized screen resolution
- 1366x768 as the minimum screen resolution.
The Web RCS has been optimized for Chrome web
browser in full screen mode.
Please note that your browser and Flash Player
had to be updated frequently, depending on new
available versions.
Operating system:
- Windows XP SP3 or above
- Mac OS v10.7 or above
- Ubuntu v10 or above
- Linux OS 11 or above
Web browser:
- IE v10 or above
- Chrome v32 or above
- Firefox v22 or above
- Safari v6 or above
- Opera v10 or above