AMETEK XG Family Programmable DC - Manual (Page 105)

Analog Programming (APG) and Isolated Analog Programming (ISOL)
M370430-01 Rev E 4-5
4
Analog Programming (APG) Connector J1
The APG connector is an 18-pin connector. See Figure 4-1.
The APG connector provides access to the following functions:
• Sense control
• Analog programming and monitoring.
Jumper Jumper
Figure 4-1 APG Connector Terminals
Table 4-3 APG Pins and Functions J1
Pin Reference Function
J1.1 +SNS Positive (+) Sense
J1.2 +LS Positive (+) Local Sense
J1.3 -NC
J1.4 -NC
J1.5 -LS Negative (-) Local Sense
J1.6 -SNS Negative (-) Sense
J1.7 COM Analog Common Same as power supply negative sense (-SNS)
J1.8 COM Analog Common Same as power supply negative sense (-SNS)
J1.9 VOL_PR Analog Voltage Programming Input
J1.10 CUR_PR Analog Current Programming Input
J1.11 VOL_RES_PR Voltage Resistive Programming Input
J1.12 CUR_RES_PR Current Resistive Programming Input
Jumper. Factory default condition.
Jumper. Factory default condition.