AMETEK SLD Series - Manual (Page 70)

Remote Programming Sorensen SLD-Series DC Load
5-16 M540075-01 Rev C
NAME
Purpose:
Electronic Load model number query command.
Command Syntax:
All Modules:
NAME?{NL}
Description:
NAME? return the electronic load’s model number.
PROTECTION Status Register
Purpose:
OPP, OTP, OVP, and OCP protection status query command.
Command Syntax:
All Modules:
PROT?{NL}
Description:
PROT? returns the present protection status; the status byte register summarizes all of the
protection status events from all status register. the following figure describes the status byte the
happened on the SLH-series Electronic load. The PROT status byte register is cleared when a
CLER command clears all of the PROT and ERR status registers.
bit 7 bit 0
7 6 5 4 3 2 1 0
OPP
OTP
OVP
OCP
Figure 5-2 Protection Status Register
ERROR Status Register
Purpose:
ERRor status register query command.
Command Syntax:
All Modules:
ERR?{;|NL}
Description:
ERR? returns the present error status; the status byte register summarizes all of the error status
events from all status registers. the following figure describes the status byte the happened on the
SLH-series electronic load. The ERR status byte register is cleared when a CLER command clears
all of the PROT and ERR status registers.