AMETEK SLD Series User Manual
Page 68
Remote Programming
Sorensen SLD-Series DC Load
5-14
M540075-01 Rev C
RESISTANCE Level
Purpose:
The Constant Resistance mode's load resistance level query command.
Command Syntax:
CR:{HIGH|LOW}{?}{;|NL}
Description:
RES:LOW? returns the presently programmed low load resistance level in Constant Resistance
mode of SLH-series DC electronic load.
The engineering unit is “OHM”.
VOLTAGE Level
The Constant Voltage mode's load voltage level query command.
Command Syntax:
CV:{LOW|HIGH}?{NL}
Description:
CV:LOW? return the presently programmed low load voltage level in Constant Voltage mode of
SLH DC electronic load.
CV:HIGH? return the presently programmed high load voltage level in Constant Voltage mode of
SLH DC electronic load.
The engineering unit is "V".
POWER Level
The Constant Power mode's load power level query command.
Command Syntax:
CP:{LOW|HIGH}?{NL}
Description:
CP:LOW? return the presently programmed low load power level in Constant Power mode of SLH
DC electronic load.
CP:HIGH? return the presently programmed high load power level in Constant Power mode of SLH
DC electronic load.
The engineering unit is "W".
LOAD ON/OFF
Purpose:
LOAD ON or LOAD OFF status query command.
Command Syntax:
LOAD?{NL}
Description:
LOAD? returns the present load status, “0” indicates LOAD OFF, and “1” indicates LOAD ON.