1 accessories for each module, Features of the sld-series dual dc electronic load, Meter reading go/ng check capability – AMETEK SLD Series User Manual
Page 17: Built-in power supply ocp and ovp testing function, Programmable load on and load off voltage control

Sorensen SLD-Series DC Load
Introduction
M540075-01 Rev C
1-5
1.2
Features of the SLD-Series Dual DC Electronic Load
The SLD-series dual DC Electronic load includes six models, where 200-300W models are
suitable for PS/2,ATX personal computer power supply testing, 150W models are for low
power output power supply (ex. DC/DC converter) testing applications, the 550W module is
designed for higher power computer server power supply applications.
•
Very flexible Dual Load configuration to SLM mainframe with maximum power up to
300W (250W+50W) for single-bay module or up to 550W for the dual bay module; it
meets multiple output power supply test requirements.
•
Both Front panel and Remote control are available; the remote interface can be built-in
RS-232 or GPIB with setting and read-back capability. (GPIB is optional in the SLM-1
chassis).
•
Dual Voltage and current meter display with 16-bit high accuracy/resolution A/D
converter.
•
Built-in Dynamic pulse generator for dynamic loading control.
•
Meter reading GO/NG check capability.
•
Short circuit load testing capability with short circuit current measurement.
•
Built-in 150 sets Store/Recall EEPROM memory.
•
Protection against Over Voltage, Over current, Over power, Over temperature, and
reverse polarity.
•
Built-in power supply OCP and OVP testing function.
•
Power supply output automatic testing by the auto-sequence function of mainframe.
•
Programmable Load ON and Load OFF voltage control.
•
Advance Cooling Fan control, the fan speed is proportional to the load power, the fan
noise can be reduced in low power applications.
1.2.1
Accessories for Each Module
Accessories SLD-60-505-255
SLD-61-505-255
SLD-60-20-102/
SLD-80-20-102
SLD-61-5-752 SLD-62-5-752 SLD-60-105-550
Miniature banana plug (Red)
2
1
2
1
0
2
Miniature banana plug (Black)
2
2
2
2
2
2
Miniature banana plug (White)
0
1
0
1
2
0
Banana plug (Red)
2
1
2
1
0
4
Banana plug (Black)
2
2
2
2
2
4
Banana plug (White)
0
1
0
1
2
0
Heavy spread lug terminal
2
2
0
0
0
4
Spread lug terminal
2
2
4
4
4
2
Operation manual
1
1
1
1
1
1
Table 1-1 Accessories Included with Each SLD-series Module