AMETEK SLD Series - Manual (Page 47)

M540075-01 Rev C 4-1
SECTION 4
APPLICATIONS
This chapter describes the application information of SLM-series DC electronic load module.
4.1 Local Sense Connections
Figure 4-1 illustrates a typical set up with the electronic load connected to the DC power supply.
Local sensing is used in applications where lead lengths are relatively short, or where load
regulation is not critical. The 5-character voltage meter of SLM-series DC electronic load
measures the voltage of DC INPUT Terminal automatically; load leads should be bundled or tie-
wrapped together to minimize inductance.
Figure 4-1 Local Voltage Sense Connections