AMETEK DLM 600W Series - Manual (Page 27)

DLM 600W Series
M362161-01 Rev J 2-3
2.5 Rack Mounting
A rackmount kit, Sorensen part number DLMRK, is an option that allows mounting
either one unit (see Section 2.5.1) or two units side–by–side (see Section 2.5.2) in a
standard 19" rack. The chassis is designed to permit units to be stacked one on top of
the other without requiring clearance gaps between the units, or the use of slides.
Stacking does not restrict airflow since the top or bottom is not utilized for air intake or
exhaust. Clearance slots in the chassis accept angle brackets for supporting the units in
the rack without increasing the 1U (1.75") height of the chassis.
CAUTION
Four screws (two on each side), #6-32, at the front sides of the
chassis are used for rackmounting. Damage could result if the
penetration of screws into the chassis exceeds 0.25" (6.35 mm).
PART NO. DESCRIPTION ITEM NO. QUANTITY
9361764-01 PANEL, RACK, MNT, SGL UNIT DLM600 1 1
9361455-01 BRACKET, CHASSIS EAR MOUNT 2 2
9361912-01 BRACKET, RACK MOUNT-DLM600W 3 2
9361456-01 BAR, CHASSIS TIE MOUNT 4 1
9361916-01 BRACKET, ADPTER, RK MT-DLM600W 5 2
110DS04-04 SCREW, 6-32X, 250, SEMS, PPH, CS 6 2
112GL04-01 NUT, 10-32, W/WASHER, KEP, CS 8 4
110GS04-08 SCREW, 10-32X.500, SEMS, PPH, CS 9 8
110-032-01 SCREW, 10-32X.500, BLACK 27038 10 4
110DG20-05 SCREW, 6-32X.312, PHF, 100D, SS 11 6
Table 2–1. DLM 600W Rackmount Kit Parts List