AMETEK DLM 600W Series - Manual (Page 24)

DLM 600W Series
M362161-01 K 1-8
Remote Analog Interface Connector: 25–position female subminiature–D connector.
Remote Sense Connector: Two–position connector, Molex #39-30-0023.
Paralleling Interface Connector: Two six–position connectors, Molex #43045-0602,
for use with the Paralleling Cable, Sorensen part number DLMP1.
1.4.7 Regulatory Agency Compliance
Units will comply with the requirements of the European Low Voltage Directive
(IEC 61010-1:90+A1:92+A2:95) and EMC Directive (EN 61326:1998) as required for the
CE mark.
Electrostatic Discharge: IEC 61000-4-2
Radiated RF Immunity: IEC 61000-4-3
Fast–Transients: IEC 61000-4-4
Surge: IEC 1000-4-5
Conducted RF Immunity: IEC 1000-4-6
Input Voltage Interruptions: IEC 1000-4-11
Conducted Emissions: CISPR 16-1/2
Radiated Emissions: CISPR 16-1/2
LVD Categories: Installation Category II; Pollution Degree 2; Class II Equipment;
For Indoor Use Only