Adept T20 Pendant - Manual (Page 49)

4.10 Loss of Connection
4.10 Loss of Connection
If the T20 pendant ever loses connection to the Adept SmartController EX motion controller for
any reason (e.g. controller reboot), a Connection Lost screen will be displayed. From this
screen, pressing OK will tell the pendant to try to reconnect to the controller.
Figure 4-5. Connection Lost Screen
If the reconnection fails, use the ACE software to verify that the controller's monitor window is
responsive. If this state persists, contact Adept for assistance.
4.11 Cleaning
To clean the Adept T20 pendant, use a soft cloth dampened with a small amount of water or a
mild cleaning agent.
CAUTION: Never clean the Adept T20 pendant display screen or other
surfaces with solvents, abrasive cleaners, or scrubbing sponges.
4.12 Periodic Maintenance
Periodically check the protective covers of the Adept T20 pendant to ensure that all housing
screws are firmly tightened, and that there is no damage to the cable entry area, sealing plug,
or cable strain-relief.
Adept T20 Pendant User's Guide, Rev. C
Page 49 of 56