Adept T20 Pendant - Manual (Page 43)

Adept T20 Pendant User's Guide, Rev. C
Page 43 of 56
Chapter 4: Maintenance
This chapter describes how to set the screen saver, set default values for initial speed and
approach distance, enable smart locations and pendant messages, update the pendant's firm-
ware, troubleshoot problems, and maintain the pendant.
4.1 The System Maintenance Screen
The System Maintenance screen is used to set various pendant options, obtain information on
the system, and view the error log.
Figure 4-1. System Maintenance Screen
The following table describes the options shown on the System Maintenance screen.
Option Description
Screen Saver Sets the screen-idle time (Thirty Seconds, One Minute, Two
Minutes, Five Minutes, Ten Minutes, Twenty Minutes, One
Hour) before the screen saver is activated. For details, see Set-
ting the Screen Saver on page 44.
Initial Speed Sets the default speed used when the system starts up (Slow,
Normal). For details, see Setting the Initial Speed on page 45.
Smart Locations Enables/disables the Smart Locations feature, which organ-
izes the locations by type. For details, see Enabling Smart
Locations on page 45.
Approach Dist Sets the approach distance (1 mm to 200 mm). For details,
see Setting the Approach Distance on page 45.