Adept T20 Pendant - Manual (Page 44)

Chapter 4: Maintenance
Option Description
Pendant Msgs Enables/disables whether errors are displayed. If disabled,
errors are not reported to the pendant.
The following table describes the soft keys shown on the System Maintenance screen.
Soft Key Description
Info Accesses a screen that displays the system information from
the Adept controller. For details, see Displaying System
Information on page 46.
Errors Accesses the error log. For details, see Displaying Recent
Errors on page 47.
Update Updates the pendant firmware. For details, see Displaying
System Information on page 46.
4.2 Setting the Screen Saver
You can specify the length of time without activity before the screen saver is activated.
To set the screen saver idle time:
1. From the Home 1 screen, press Next > to display the Home 2 screen.
2. Press Maint. The System Maintenance screen opens.
3. If necessary, press the up/down arrow buttons to select the Screen Saver field. Press OK.
4. Press the up/down arrow buttons to select the length of time before the screen saver is
activated.
The options available are:
l Thirty Seconds
l
One Minutes
l Two Minutes
l Five Minutes
l Ten Minutes
l
Twenty Minutes
l One Hour
5. Press OK to accept the change. Press Cancel to revert to the previous setting.
Adept T20 Pendant User's Guide, Rev. C
Page 44 of 56