Drylam PRO-LAM PL1200-HP - Manual (Page 61)

61
Rotary Press
Your laminator is capable of being used as a rotary press this process is very similar to cold laminating /
mounting or pressure sensitive laminating. Pls Inc. manufactures a laminator that is cold capable only.
the model number will start with a “R” this will designate a cold press only and this model will be void
of most functions except speed control.
It may be necessary to set the temperature at 100 or 125 degrees on models so equipped
The most common uses for this technique is to laminate two materials such as paper to adhesive backed
material for cover making or book making and for laminating masking in the sign industry
Nearly all of the surfaces of your laminator are not magnetic including the front laminating rollers,
mounting to magnetic materials is not a problem
• Do not roll materials that may damage the rollers
• Do not allow adhesives that may damage the rollers to contact them
• Do not roll sharp or abrasive materials
• Do not allow materials to wrap on the rollers
• Do not press materials thicker than 3/16
• The amount of pressure is limited to the amount of pressure available do not supplement
See cold laminating for additional relevant information.