Epson PERFECTION V600 PHOTO - Manual (Page 29)

Slide one or two film strips all the way into the film holder with the shiny base side facing down. Your images and
any wording on the film strips should appear backwards on the side that faces up.
Note:
Hold the edge of the film gently or use gloves to touch the film; otherwise you may damage the
film.
Make sure the white stickers on the back of the film holder and the areas around them are not
scratched, dusty, or covered in any way. If the areas are obscured, the scanner may have trouble
recognizing your film in Full Auto Mode.
Do not cover the small holes in the film holder.
Make sure the film strip is placed as shown.