Vortech 2005-2008 Ford 4.0L V6 Mustang User Manual
Page 40
![background image](/manuals/743249/40/background.png)
P/N: 4FU020-610
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
06AUG08 v4.1 05MusV6(4FU..610v4.1)
30
12. FINAL CHECK
A. If your vehicle has gone over 15,000 miles
since its last spark plug change, you will need
to change the spark plugs now before test
driving the vehicle.
B. Check all fittings, nuts, bolts and clamps for
tightness. Pay particular attention to oil and
fuel lines around moving parts, sharp edges
and exhaust system parts. Make sure all
wires and lines are properly secured with
clamps or tie-wraps.
C. Check all fluid levels, making sure that your
tank(s) is/are filled with 91 octane or higher
fuel before commencing test drive.
D. Start the engine and allow to idle a few min-
utes, then shut off.
WARNING:Do not attempt to operate the vehi-
cle until all components are
installed and all operations are
completed including the final check.
H.O Charge Cooled Kits Only
NOTE: Check to see that CAC coolant is
flowing through the surge tank. If
coolant is not flowing, remove the
3/4" rubber hose from the side of
the surge tank and apply light suc-
tion in an attempt to pass any
trapped air in the system.
Reconnect the hose and recheck
coolant flow.
E. Recheck to be sure that no hoses, wires, etc.
are near exhaust headers or moving parts
and check for signs of any fluid leakage.
F. PLEASE TAKE SPECIAL NOTE: Operating
the vehicle without ALL the subassemblies
completely and properly installed may cause
FAILURE OF MAJOR COMPONENTS.
G. Test drive the vehicle.
H. Always listen carefully for engine detonation.
Discontinue heavy throttle usage if detonation
is heard.
I.
Read the
STREET SUPERCHARGER
SYSTEM OWNER'S MANUAL AND
RETURN THE WARRANTY REGISTRATION
FORM within thirty (30) days of purchasing
your supercharger system to qualify.
Fig. 12-a (Standard Kit)
Fig. 12-b (H.O. Kit)