Vortech 2005-2008 Ford 4.0L V6 Mustang User Manual

Page 27

P/N: 4FU020-610

06AUG08 v4.1 05MusV6(4FU..610v4.1)

Fig. 7D-d

Fig. 7D-e

NOTE: Reinstall the factory ground

wire with one of the 6mm

screws and washers.

10mm

HEADED

BOLT

RESERVOIR

BRACKET

Fig. 7D-f

FACTORY

GROUND STRAP

Fig. 7D-g

D. ENGINE COOLANT RESERVOIR

INSTALLATION, (2005-2006 Models

Only), cont’d

5. Remove the 10mm headed bolt that

secures the back of the ECU and the

power distribution box. (See Fig. 7D-d.)

6. Install the coolant reservoir. Secure the

front of the reservoir with the factory fas-

tener removed previously. (See Fig.

7D-e.)

7. Attach the rear mounting bracket with the

surge tank mounting bracket to the strut

tower with the 6mm x 20mm long screws

and washer provided. (See Fig. 7D-f.)

NOTE: Leave this bolt loose for final

adjustment in a later step.

8. Attach a 3/4" hose elbow to the front of

the coolant reservoir. Use the supplied

Ø3/4 x Ø1" increaser to connect it to the

factory surge-tank hose. (See Fig.

7D-g.) Tighten the clamps on all connec-

tions and secure the hose so that it will

not contact any moving part.

7. CHARGE AIR COOLER INSTALLATION (H.0. Kits Only), cont’d