Vortech 2005-2008 Ford 4.0L V6 Mustang User Manual
Page 23
P/N: 4FU020-610
©2008 Vortech Engineering, LLC
All Rights Reserved, Intl. Copr. Secured
06AUG08 v4.1 05MusV6(4FU..610v4.1)
13
7. CHARGE AIR COOLER INSTALLATION
(H.O. KITS ONLY)
, cont’d
Fig. 7B-j | Viewed From Below
17. Locate the 3/4" x 150° molded rubber
hose (7U038-150). Connect the short end
of the 3/4" x 150° hose to the lower port
on the previously installed water cooler.
Install one of the provided 3/4" hose
unions into the open end of the 150°
hose. Attach a length of 3/4" hose approx-
imately 24" between tthe hose union and
the previously installed water pump dis-
charge. Secure all hose connections
using the nylon ratchet clamps provided.
(See Fig. 7B-j.)
18. Attach a length of 3/4" hose approximatel-
ly 48" long to the previously installed
water pump feed port and secure. Route
the open end of the installed hose toward
the passenger’s side shock tower. This
hose will be connnected in later step.
(See Fig. 7B-h.)
WATER COOLER
HOSE TO
WATER
PUMP
3/4" x 150°
HOSE (7U038-
150)
3/4" HOSE
UNION
FRONT OF VEHICLE
B.
WATER COOLER ASSEMBLY INSTALLATION,
cont’d
NOTE: The installation of this hose sec-
tion should maintain an “uphill”
routing wthout dips or kinks.