Turning Technologies Response - Manual (Page 13)

______________________________________________________________ Response User’s Guide
13 | P a g e
Configuring Student PRS RF Response Pads
Depending on your requirements, the PRS RF Student Response Pad may need to be
configured. Only PRS RF Student Response Pads can be configured. By default, PRS RF Student
Response Pads are configured as Normal.
Normal
• Factory default.
• Generally used in a university setting when the student owns the Student
Response Pad or when the Student Response Pad is the property of the student
for the school term.
• The student enters his or her student ID one time only. The student ID is stored
in the CPS Pulse Student Response Pad's memory and is transmitted with each
answer to ensure the student receives credit for the response.
Loaner
• Requires initial configuration.
• Typically used when the school owns the Student Response Pads and multiple
classes share the Student Response Pads.
• Because the students share the Student Response Pads, the student IDs are not
remembered by the Student Response Pad and therefore it prompts for the
student ID each time it is powered on.
• Also may also be used in case a student forgets to bring their Student Response
Pad to class.
Instructor
• Requires initial configuration.
• The Instructor Student Response Pad is used by the teacher to send commands
to the session and to remotely control it from anywhere in the room.
Closed, Closed Loaner, Closed Instructor
• Student Response Pads configured as any one of the three Closed configurations
can only be used in a Class whose System Type has been set to Closed.
• Closed and Closed Loaner PRS RF Student Response Pads can join the Closed
Class and only a Closed Instructor PRS RF Student Response Pads can remotely
run the Session for the Class.
• The Closed Student Response Pads will be linked to the Closed Class by a Class
ID; the Class ID is configured in both the Response class and clicker allowing for
only clickers with the class ID configured in them to join the class.
• The Closed Student Response Pads will automatically join a Closed Class when
powered on.