Viewing the compact mode, Manually setting a timer, Polling – Turning Technologies TurningPoint Cloud User Manual
Page 113
TurningPoint Cloud
113
NOTE
Select either duration or end time.
c
Select the message to be sent to participants from the Completed Test Message drop-down menu.
TIP
The default login options can be set in the preferences. For more information, see
5
Click OK.
At this time the participants may log into the test.
Next Steps
Now that participants have logged into the test, it is time to begin
Viewing the Compact Mode
For users who do not want to view the entire Self-Paced Polling application window, a compact view is available. Compact
mode displays the menu bar, polling icon and timer.
1
From the menu bar, click Tools and select View Compact.
2
To return to full view, click Tools and select View Full.
Manually Setting a Timer
Test time limits may be set manually or changed if the time limit was incorrectly set.
1
From the menu bar, click Tools and select Timer.
The Timer Options window opens.
2
Select one of the following options:
l
Duration- Enter the hours and/or minutes for the
length of the test.
l
End Time- Set a specific end time for the test.
l
No Timer- The test will have no timer and polling
must be closed manually.
3
Click Set.
Polling
The Self-Paced Polling environment allows participants to take a paper-based test on a response device.
The Polling section covers:
Viewing the Live Results Monitor
turningtechnologies.com/user-guides