Taser Evidence-Sync - Manual (Page 49)

Page 49 of 86
MDT Mode
Loading Categories with EVIDENCE Sync (MDT)
Notes:
• To perform this procedure, you need to be connected to the Internet.
• Your camera’s Device Mode must be set to Online for this procedure to work. See
Configuring Your TASER AXON Camera and Updating the Firmware (
Online) in Chapter
9: Configuring Your TASER CAM Recorder, TASER AXON Camera, or CEW
for more
information.
• Unlike with online and offline modes, there is no way to remove videos from the camera
in MDT mode.
• When a TASER AXON camera’s memory is full (has reached its storage limit), the
camera will stop recording. To remove videos from the camera, the EVIDENCE Sync
software must be in the online mode or offline mode. See Removing Videos from a
TASER AXON Camera (Offline)
and Uploading TASER CAM Records to
EVIDENCE.com Services and Adding Categories to Videos with EVIDENCE Sync
Software (Online)
.
1. Connect the camera to your computer with the 2.5 mm to USB download cable.
2. Click
Start and select All Programs.
3. Click SYNC and select SYNC.
4. Click SYNC, select Mode, and then select MDT.
5. Click Load Categories.
Figure 63
6. In the Enter agency field, type your agency’s EVIDENCE.com domain (Figure 64).