StorCase Technology FC-to-SCSI Single & Dual RAID - Manual (Page 98)

FC-SCSI Dual RAID Module User's Guide - Rev. A01 StorCase Technology, Inc.
Configuration 85
Figure 52: Dynamic Spare Configuration Screen
To enable dynamic spares:
1. Select Configuration Menu from the System Menu and press Enter.
The Configuration Menu should now display (Figure 31).
2. Select Option Configuration and press Enter.
The Option Configuration Menu should now display (Figure 32).
3. Select Dynamic Spare Configuration and press Enter.
The Dynamic Spare Configuration screen will display (Figure 52).
The current setting is marked with an * next to it.
4. Select Enabled press Enter.
The Rescan Rate screen should now display.
5. Enter the rescan rate (in minutes).
This tells the controller how often it should look for an available drive by rescanning
the bus. Rescanning the bus frequently can affect performance.
The system will confirm the rescan rate.
6. Select Yes and press Enter.