beautypg.com

StorCase Technology FC-to-SCSI Single & Dual RAID User Manual

Page 45

background image

32

Configuration

StorCase Technology, Inc.

FC-SCSI Dual RAID Module User's Guide - Rev. A01

6.

Enter the number of drives (excluding spares) to be used in the array and press Enter.
The Select Drives screen should now display (Figure 17).

Figure 16: Number of Drives Screen

7.

Select the drives to be used for the array and press Enter.
A drive is selected by highlighting it and then pressing Enter. Each selected drive turns

gray in the drive list. To skip a drive, use the é or ê key.
If the array is mirrored, RAID 3, RAID 4, RAID 5, or RAID 50 and there are one or more

drives left, the Number of Spares screen will display.

Figure 17: Select Drives Screen