Changing array ownership – StorCase Technology FC-to-SCSI Single & Dual RAID User Manual
Page 65
52
Configuration
StorCase Technology, Inc.
FC-SCSI Dual RAID Module User's Guide - Rev. A01
4.
Enter a name for the array and press Enter.
Up to 20 characters (any character, including spaces) can be used.
The system will now confirm the change.
5.
Select Yes and press Enter.
Changing Array Ownership
If using the Active-Active mode, this function allows the user to change the ownership of any
array between the controllers.
Changing ownership lets the user continue using an array without interruption and makes the
array visisble on the controller the user changes it to (the user will no longer see the array
ion the original controller).
To change array ownership:
1.
Select Array Menu from the System Menu and press Enter.
The Select Array screen should now display, along with a list of existing arrays (Figure
19).
2.
Select the desired array and press Enter.
The Array Menu should now display (Figure 20).
3.
Select Switch Array Owner and press Enter.
The system will now confirm your request to change ownership.
4.
Select Yes and press Enter.
5.
Assign a new LUN to each array partition
.