StorCase Technology FC-to-SCSI Single & Dual RAID - Manual (Page 21)

8 Installation
StorCase Technology, Inc. FC-SCSI Dual RAID Module User's Guide - Rev. A01
#6-32 Phillips
F.H. Screw
Blank
Plate
Blower
module
IFSII_DR8
Figure 4: Installation Location of RAID Battery Backup Unit
To install the RAID Battery Backup Unit(s):
1. Loosen and remove the #6-32 Phillips F.H. screw securing the blank plate to the
Blower Module (Figure 4). Remove blank plate.
2. Install the RAID Battery Backup Unit into the blower module (Figure 5).
3. Tighten the thumbscrew to secure the Battery Backup Unit in place.