Martin Christ RVC 2-33 CDplus - Manual (Page 56)

RVC 2-33 CD &
Maintenance and Service
56 Version 01/2009, Rev. 1.21 of 25/11/2013 - sb
Translation of the original operating manual
Remove the rotor shaft from the axle by lifting it vertically upward.
Fig. 8.3: Removing the rotor shaft
Clean the lid with a disinfectant or cleaning agent.
Now the rotor chamber can be cleaned with a cleaning agent or
disinfectant.
Clean the rotor shaft.
Ensure that no cleaning agent or disinfectant gets into the opening at
the bottom of the rotor chamber. This can lead to irreparable damage
at the motor.
Fig. 8.4: Rotor shaft without rotor shaft
Reinstall the drive shaft and fasten it.
Push the cap fully onto the drive shaft.
Connect the power cord and switch the rotational vacuum
concentrator on.
Perform a test run.