Martin Christ RVC 2-33 CDplus - Manual (Page 47)

RVC 2-33 CD &
Using the RVC
Version 01/2009, Rev. 1.21 of 25/11/2013 - sb 47
Translation of the original operating manual
Change display contrast
Select the menu "Change display contrast".
Change the contrast by pressing the up/down keys.
Confirm the new setting by pressing the right-hand function key.
Fig. 6.34: Changing the contrast
Select language
The CD
plus
control system can be used in German or English.
Select the menu "Select language".
Select the language using the up/down keys.
Confirm the input by pressing the right-hand function key.
Fig. 6.35: Selecting a language
Settings
The Settings menu is used to customise the operation and process
management of the control system.
Select the value you want to set.
Change the value using the up/down keys.
Confirm the input by pressing the right-hand function key.
Fig. 6.36: Settings menu
Timer Warm Up
You can set a warm-up time between 5 and 99 minutes.
Temperature Warm Up
During the warm-up phase, the rotor temperature is set to the set
temperature.