Martin Christ RVC 2-33 CDplus - Manual (Page 49)

RVC 2-33 CD &
Using the RVC
Version 01/2009, Rev. 1.21 of 25/11/2013 - sb 49
Translation of the original operating manual
Load default settings
All set values and parameters are reset to the delivery status of the
rotational vacuum concentrator. The reset requires confirmation:
Fig. 6.38: Loading default settings
Extended service menu
The extended service menu is exclusively reserved for service
engineers. This area is password-protected and not available to the
user.
Fig. 6.39: Extended service menu
6.4 Switching the Rotational Vacuum Concentrator OFF
The rotational vacuum concentrator must be in the standby mode.
Press the mains power switch on the front of the right-hand side
panel.