Datamax PE - Manual (Page 67)

PE Series Operator’s Manual 57
BQQMJDBUPS!CVTZ System is waiting for control of the Print
Cycle from the applicator.
Printer applicator enable control may be
incorrectly configured. Verify setup;
see Section 4, Advanced Setup/PE
Options/PE Apply HW.
Possible defective applicator output
control.
Possible defective printer applicator
port.
DPWFS!PQFO!GBVM
U
The cover interlock switch is open.
Verify that the cover has been closed
completely.
Interlock switch may be defective or out
of adjustment; call for service.
IFBE!VQ!GBVMU The printhead interlock switch is open.
Verify that the printhead Head-Lift
Lever has been locked down completely
into the stand-off.
Interlock switch may be defective or out
of adjustment; call for service.