Datamax PE - Manual (Page 61)

PE Series Operator’s Manual 51
6.3 Cleaning the Platen Roller
Print quality may be affected if the platen becomes contaminated
with grit, label adhesive, or ink. To clean the platen:
n Turn ‘Off’ and unplug the printer.
o Open the cover. Raise t he Head-Lift Lever ‘up’ to access
the printhead. Move ribbon or paper away as necessary.
p Using a clean lint-free cloth dampened with isopropyl
alcohol wipe off any debris from the platen. Manually
rotate the roller, cleaning the entire surface. Allow to dry.
q Re-install ribbon and media, if necessary.
r Lower the printhead by turning the Head-Lift Lever ‘down’
until it locks into position.
s Close the cover. Plug in and turn ‘On’ the printer. Feed
several labels to normalize tracking.
; Note: If the platen has excessive build-up that cannot be removed
with isopropyl alcohol, you may use acetone sparingly.
NEVER use a sharp object when cleaning the platen roller.