Datamax PE - Manual (Page 54)

PE Series Operator’s Manual 44
; Note: Labeling program settings can override many of the functions
available through the printer’s menu.
5.3 Label Start of Print
Start of print position can be affected by the position of the label
edge sensor, especially if the labels are irregularly shaped. Once
properly positioned, the start of print position can be adjusted by
using the O command or through your labeling program.
Also, the TOF Adjust provides additional printer specific adjustment
and can be found in the Basic Function Menu.
5.4 Label Presentation
Following the printing of a label, the printer will position the label
according to it’s programmed Present Distance. The value will be
dependent upon the needs of the applicator system. The Present
Distance value can be input using the f system level
command, through Label Options in the Advanced Setup Menu or
through your labeling program.