Datamax PE - Manual (Page 40)

PE Series Operator’s Manual 30
4.1 Accessing the Menu Tree
The menu is divided between basic function and advanced setup
levels. (To see a complete overview, the Menu Tree is located in
Appendix G.)
; Note: Default values or settings may vary depending on the version
and customer applications. Factory default settings will be
indicated with * symbol.
4.1.1 Basic Functions
There are nine basic functions including a gateway to the advanced setup
level.
Print Method Column Adjust
Sensor Top of Form PE Applicator HW
Darkness Advanced Setup
Start of Print
LCD :
UVF!!GFC14!!22;66B
!!!
SFBEZ
From the Printer Ready screen, enter the Basic Function screen by
pressing the Ø key :
Qsjou!Nfuipe
Controls the type of print method to be used.
Direct Enables direct-thermal printing (no ribbon).
*Transfer Enables thermal-transfer printing (ribbon installed).
Tfmfdu!UPG
Controls the type of media sensing to be used.
*Gap Senses on a gap or notch between each label.
Reflective Senses on a reflective mark between each label.
Continuous Senses only presence, TOF set by label format.