Datamax PE - Manual (Page 27)

PE Series Operator’s Manual 17
3.5 Installing a FLASH Cartridge
FLASH cartridges provide the same features as DRAM, with the
added benefit of providing permanent storage for custom fonts, label
formats and images. FLASH memory is essentially a non-volatile,
electronically erasable PROM. A write protect switch on the
cartridge is used to safeguard stored data against accidental erasure.
To install a memory cartridge:
n Turn ‘off’ and unplug the printer.
o Remove the two screws securing the Electronics Access
Panel and open to reveal the connector, see figure below.
Figure 3-9 FLASH Cartridge Connector Location