Datamax PE User Manual
Page 26
PE Series Operator’s Manual
16
Removal of a Completely Used Ribbon
Complete the following steps to remove a completely used ribbon:
n Unlatch and raise the printhead.
o Rotate the Ribbon Take-up Hub, winding it until the ribbon
clears the media path.
p Rotate the J-Hook, unlatch and remove.
q Grasp the roll of used ribbon and pull it straight off of the
Ribbon Take-up Hub and discard.
r Pull the empty ribbon supply core from the Ribbon
Supply
Hub. Save the core for later use on the Ribbon
Take-Up
Hub or discard.