Hanna Instruments HI 8000 Series - Manual (Page 87)

87
Recommendations for user
Before using this product, make sure that it is entirely suitable for the environment in
which it is used.
Operation of this instrument in residential area could cause unacceptable interfer-
ences to radio and TV equipment.
Any variation introduced by the user to the supplied equipment may degrade the
instrument’s EMC performance.
Unplug the instrument from the power supply before replacing the fuse or making any
electrical connections.
All rights are reserved. Reproduction in whole or in part is prohibited without the
written consent of the copyright owner, Hanna Instruments Inc, 584 Park East
Drive, Woonsocket, Rhode Island, 02895, USA.
Hanna Instruments reserves the right to modify the design, construction and
appearance of its products without advance notice.
WARRANTY
All Hanna controllers are warranted for two years against defects in workmanship
and materials when used for their intended purpose and maintained according to
instructions.
Damages due to accident, misuse, tampering or lack of prescribed maintenance
are not covered. This warranty is limited to free of charge or replacement of the
meter only, if any malfunctioning is due to manufacturing defects.
If service is required, contact the dealer from whom you purchased the instrument.
If under warranty, report the model number, date of purchase, serial number and
the nature of failure. If the repair is not covered by the warranty, you will be notified
of the charges incurred. If the instrument is to be returned to Hanna Instruments,
first obtain a Returned Goods Authorization Number from the Customer Service
department and then send it with shipment costs prepaid. When shipping any
instrument, make sure it is properly packaged for complete protection.